500 Gaj in Square Feet: Plot Dimensions (50x90 Ft) and GMADA 1 Kanal Building Bylaws (2026)

Understand 500 Gaj in square feet (exact 4,500 sq ft), standard 50x90 ft dimensions, and GMADA 1 Kanal building bylaws. Detailed FAR, setbacks & e-Naksha rules.
Short answer: In Chandigarh Tricity and urban Punjab, 500 Gaj equals exactly 4,500 square feet (500 square yards or 418.06 square metres), which constitutes a standard 1 Kanal residential plot. In GMADA master-planned sectors (including SAS Nagar Mohali Sectors 68 to 80, Aerocity, IT City, and Eco City New Chandigarh), standard 500 Gaj plots measure 50 feet front by 90 feet depth. Under GMADA and Punjab Urban Planning and Development Building Rules, 1 Kanal plots permit a maximum ground coverage of 50% to 60% (2,250–2,700 sq ft), a baseline Floor Area Ratio (FAR) of 2.1 allowing up to 9,450 sq ft of total covered space, mandatory setbacks of 15–20 ft front, 10–15 ft rear, and 5–8 ft sides, and qualify for expedited architect self-certification on Punjab e-Naksha.
- 4,500Square Feet500 Gaj (1 Kanal GMADA standard)
- 50 × 90 ftStandard DimensionsFrontage × Depth in planned sectors
- 2.1 FARFloor Area RatioUp to 9,450 sq ft built-up area
- 50%–60%Ground Coverage2,250–2,700 sq ft open footprint
The Core Mathematical Conversion: Gaj, Square Yards, and Square Feet
In Indian property transactions across Punjab, Haryana, and Chandigarh UT, land measurements frequently switch between traditional vernacular units and statutory metric or imperial measurements. The fundamental unit is the Gaj (often spelled Gaz), which represents exactly one British imperial Square Yard.
Because 1 Yard equals 3 linear feet, 1 Square Yard equals 9 square feet (3 ft × 3 ft). Therefore, the conversion calculation for a 500 Gaj plot is straightforward linear multiplication:
500 Gaj × 9 Square Feet per Gaj = 4,500 Square Feet
In metric measurements recorded on statutory layout plans and GMADA allotment deeds, 1 square foot equals 0.092903 square metres. Consequently, 4,500 square feet equals 418.06 square metres. For readers evaluating property sizes and loan values across micro-markets, Hoomzz provides free interactive area tools on our Tricity property calculators route.
Critical Title Deed Distinction: Sub-Registrar and Tehsil offices across Mohali, Kharar, Zirakpur, and Panchkula do not record property transfers in "Gaj". Conveyance deeds, sale certificates, and Jamabandi fards must cite either Square Yards (in urban planned developments) or statutory shares in Kanal and Marla (in agricultural revenue records). Always confirm that your deed reflects 500.00 Square Yards rather than colloquial verbal estimates.
The Critical Urban vs Rural Split: 4,500 Sq Ft vs 5,445 Sq Ft Kanal
One of the most dangerous points of confusion for buyers in the Tricity periphery involves the definition of a Kanal. Depending on whether you buy inside an approved GMADA sector or in a rural revenue village (such as fringe agricultural pockets around Kharar, Landran, or Banur), the term "1 Kanal" carries two entirely different physical sizes.
In master-planned urban Punjab developments under the Greater Mohali Area Development Authority (GMADA), Punjab Urban Planning and Development Authority (PUDA), and HSVP Panchkula, 1 Marla is standardized at 25 Gaj (225 square feet). Because 20 Marlas constitute 1 Kanal, an urban 1 Kanal plot equals:
20 Urban Marlas × 225 sq ft = 4,500 Square Feet (500 Gaj)
Conversely, in traditional Punjab and Haryana agricultural revenue records (Jamabandi fards governed by the Punjab Land Revenue Act), land measurements derive from the traditional 66-inch revenue rod (Karam). Under this traditional cadastral system, 1 revenue Marla equals 30.25 Gaj (272.25 square feet). Therefore, a traditional rural revenue Kanal equals:
20 Revenue Marlas × 272.25 sq ft = 5,445 Square Feet (605 Gaj)
If an unverified colonizer on the Kharar or Dera Bassi outskirts advertises a "1 Kanal plot" without an approved PUDA or GMADA master plan layout, clarify immediately whether they are transferring 500 Gaj (4,500 sq ft) or an undivided 20/160th agricultural share of a revenue Khasra. Buyers studying regional variations can review detailed breakdowns in our guide on Gaj to square feet conversion tables for Tricity plots.
Standard 500 Gaj Plot Dimensions: Frontage, Depth, and Road Widths
A plot area of 4,500 square feet can theoretically take several geometric shapes. However, GMADA sectors, planned private townships, and municipal developments enforce strict rectangular grid configurations to maintain uniform street elevations and structural symmetry.
The universal benchmark dimension for a 500 Gaj residential plot across SAS Nagar Mohali (such as Sectors 68, 69, 70, 71, 76, 77, 78, 79, and 80), Aerocity (Blocks A to H), IT City (Sectors 82 and 83), and New Chandigarh Eco City is:
Standard Plot Dimensions: 50 Feet Frontage × 90 Feet Depth
This 50-foot road frontage provides immense architectural freedom. It comfortably accommodates a three-car driveway, separate pedestrian entry gate, expansive front lawn, and generous interior living spaces with perimeter airflow. In certain older private layouts or specific corner plots, minor variations occur:
- 50 ft × 90 ft (Standard): The universal master-planned cut across GMADA sectors, JLPL Sector 90/91, and TDI City.
- 45 ft × 100 ft (Narrow Deep Cut): Found in select private developer townships, providing deeper back gardens but narrower vehicle maneuvering space.
- 40 ft × 112.5 ft (Linear Cut): Rare linear plots found in specific municipal regularization colonies along the Kharar periphery.
- Irregular & Corner Cuts: Corner 1 Kanal plots often feature standard 50x90 boundaries with a 5-foot chamfer (splay) at the corner street intersection, requiring setback adjustments.
Local real estate Instagram pages and creators are an active source of listings and area info for Tricity property seekers today, but technical dimensional checks require official municipal blueprints and physical demarcation pegs.
| Jurisdiction / Micro-Market | Standard Dimensions | Total Area (Sq Ft) | Marla Equivalency | Sanctioning Authority |
|---|---|---|---|---|
| GMADA Mohali Sectors (Sectors 68–80, Aerocity, IT City) | 50 ft × 90 ft | 4,500 sq ft | 20 Urban Marlas (225 sq ft each) | GMADA / Punjab e-Naksha |
| New Chandigarh (Eco City 1 & 2) | 50 ft × 90 ft | 4,500 sq ft | 20 Urban Marlas | GMADA Special Planning Zone |
| HSVP Panchkula (Sectors 2, 4, 6, 7, 21) | 42 ft × 108 ft or 50 ft × 90 ft | 4,500–4,536 sq ft | Standard 1 Kanal Category | Haryana Shehri Vikas Pradhikaran (HSVP) |
| Chandigarh UT Planned Sectors (Sectors 8, 9, 10, 11, 33) | 50 ft × 90 ft (Typical) | 4,500 sq ft | 1 Kanal Category | Chandigarh UT Estate Office (Urban Rules 2017) |
| Rural Revenue Pockets (Kharar / Banur / Dera Bassi outskirts) | Varies (Cadastral Khasra) | 5,445 sq ft (Rural) | 20 Revenue Marlas (272.25 sq ft each) | District Revenue Officer / Sub-Tehsil |
GMADA 1 Kanal Building Bylaws: Ground Coverage, FAR, and Setbacks
Constructing a residence (kothi) on a 500 Gaj plot in Mohali is governed by the Punjab Urban Planning and Development Building Rules and GMADA architectural control sheets. Unlike smaller 100 Gaj or 150 Gaj row plots where houses share boundary walls, a 500 Gaj plot falls under detached residential planning rules. The building must stand clear of its plot boundaries on all sides.
1. Permissible Ground Coverage
Ground coverage defines the maximum footprint that your building structure (including ground-floor rooms, covered porches, and verandahs) can cover on the site. Under GMADA rules for residential plots measuring 250 to 500 square metres (which includes 500 Gaj / 418.06 sq m), permissible ground coverage is 50% to 60%.
On a 4,500 sq ft plot, a 55% ground coverage ceiling permits a ground-floor covered footprint of up to 2,475 square feet. The remaining 2,025 square feet must remain completely open to the sky for setbacks, driveways, boundary green belts, and central ventilation courts.
2. Floor Area Ratio (FAR)
Floor Area Ratio (FAR) regulates the total cumulative built-up area constructed across all above-ground floors relative to plot size. In GMADA plotted sectors, the baseline permissible FAR for a 1 Kanal residential plot is 1:2.1.
This allows a maximum cumulative constructed area of:
4,500 sq ft × 2.1 = 9,450 Square Feet
This generous FAR enables homeowners to build spacious multi-level kothis consisting of Ground + 2 upper floors or Stilt + 3 independent floors, accommodating multi-generational families or luxury rental suites. Those assessing high-growth residential corridors near technology parks can check our comparison of Sector 82 IT City vs Phase 8B Industrial Area Mohali.
3. Mandatory Setbacks (Open Margins)
Setbacks are compulsory non-negotiable distances that your external building walls must maintain from plot boundaries. For a standard 50 ft × 90 ft (500 Gaj) plot under GMADA norms:
- Front Setback: Minimum 15 to 20 feet from the front boundary road line. This margin serves as a car parking forecourt, driveway, and front lawn.
- Rear Setback: Minimum 10 to 15 feet from the back boundary wall. Essential for cross-ventilation, domestic utility washing areas, and sanitary drain runs.
- Side Setback 1: Minimum 5 to 8 feet on one side to provide open pedestrian passage from front to rear.
- Side Setback 2: Minimum 5 to 8 feet on the opposite side (or wider on corner plots facing a side street).
| Bylaw Parameter | Statutory GMADA Requirement | Standard 500 Gaj Value (4,500 Sq Ft) | Compliance & Enforcement Note |
|---|---|---|---|
| Ground Coverage | 50% to 60% Maximum | 2,250 to 2,700 sq ft footprint | Violations trigger compounding penalties or demolition |
| Floor Area Ratio (FAR) | 2.1 Baseline | Up to 9,450 sq ft built-up area | Excludes basements used exclusively for domestic parking/storage |
| Front Setback | 15 to 20 feet | 15–20 ft clear from road boundary | Cantilever balconies may project max 6 ft into front yard |
| Rear Setback | 10 to 15 feet | 10–15 ft clear from back wall | Cannot be roofed over or converted into habitable rooms |
| Side Setbacks | 5 to 8 feet both sides | 5–8 ft clear margins | Must remain unblocked for fire safety and light shafts |
| Maximum Building Height | 11 m (G+2) or 15 m (Stilt+3) | 36 ft to 49.2 ft clear height | Excludes parapet (up to 3 ft) and mumty / lift machine room |
| Rainwater Harvesting (RWH) | Mandatory on plots >100 sq m | Compulsory recharge pit | Occupation Certificate withheld without physical RWH inspection |
| Rooftop Solar SPV | Mandatory on plots >500 sq yd | Minimum 3 kWp to 5 kWp setup | Regulated under PEDA net-metering guidelines |
Basements, Stilt Parking, and Independent Floors
Large 1 Kanal plots offer sophisticated structural configurations. However, GMADA enforces strict technical conditions to prevent residential congestion and structural damage to neighboring foundations.
Single-Level Basement Norms
Homeowners may construct a single basement level under a 500 Gaj plot, subject to statutory restrictions:
- Envelope Boundary: The basement footprint cannot extend into mandatory setback areas. It must stay strictly within the zoned ground-floor building envelop.
- Clear Height: Clear vertical height must measure between 2.75 metres (9 feet) and 4.25 metres (14 feet).
- Permissible Usage: Under GMADA bylaws, residential basements may only be utilized for domestic parking, household storage, home theatre/gym, or building services. Commercial clinics, coaching centres, and independent kitchens are strictly prohibited.
- Structural Safety: A structural stability certificate from an empanelled structural engineer is mandatory during plan submission to guarantee adjacent foundations remain stable during excavation.
Stilt Parking and Height Relaxations
If you construct a ground-level stilt floor dedicated to vehicle parking, GMADA allows a clear height of 8.5 feet (2.6 metres). When stilt parking is incorporated, permissible building height increases from 11 metres to 15 metres (49.2 feet), permitting Stilt + 3 habitable residential floors. The stilt space must remain completely un-walled except for structural columns, staircase lobby, and an optional 100 sq ft guard/driver washroom.
Independent Floor Registration: Punjab vs Chandigarh Ban
A major legal advantage of owning a 500 Gaj plot in GMADA Mohali compared to Chandigarh UT is floor-wise flexibility. In Chandigarh, the Supreme Court of India January 2023 ruling upheld that residential buildings in heritage sectors (Sectors 1 to 30) cannot be bifurcated into independent apartments, preventing separate floor sales. In SAS Nagar Mohali, property owners can construct independent floors on sanctioned plots subject to GMADA independent floor guidelines and separate utility metering. NRI landlords and owners managing remote assets across these corridors can read our strategic advisory on NRI remote property management in Mohali and New Chandigarh.
Mandatory Environmental Provisions: Solar PV and Rainwater Harvesting
Under unified Punjab building codes and Punjab Energy Development Agency (PEDA) mandates, residential properties measuring 500 square yards (500 Gaj) and above face compulsory green compliance rules:
1. Rooftop Solar Photovoltaic (SPV) System: Because a 1 Kanal plot reaches the statutory 500 sq yard threshold, installing a rooftop solar power system (typically 3 kWp to 5 kWp with net-metering) is compulsory. The structural height of solar frames on your terrace is excluded from the 15-metre building height calculation.
2. Rainwater Harvesting (RWH) Recharge Pit: A specialized desilting and percolation pit connected to rooftop downpipes must be constructed within your setback margin. GMADA building inspectors conduct mandatory on-site physical verification of this pit before issuing an Occupation Certificate (OC).
Approval Workflow: Architect Self-Certification via Punjab e-Naksha
Securing municipal approval for a 500 Gaj plot in Mohali does not require paying unauthorized middlemen. The Department of Local Government Punjab operates the Online Building Plan Approval System (OBPAS), widely known as Punjab e-Naksha.
Crucially, 500 square yards represents the statutory ceiling for the Self-Certification Route. Residential plots up to 500 Gaj can receive expedited building plan approval certified directly by an empanelled Council of Architecture (CoA) architect without enduring prolonged scrutiny queues at GMADA headquarters.
- Procure Official Zoning Control SheetDownload the sector-specific architectural control blueprint from the GMADA portal or your allotment file to establish exact setbacks and road margins.
- Draft CAD Drawings to e-Naksha Layer StandardsEngage a registered architect to draft floor plans, sections, elevations, RWH diagrams, and solar layout matching mandatory Smart-DCR CAD layer conventions.
- Submit Digital Application on e-Naksha PortalYour architect uploads digital drawings, proof of ownership (allotment deed / registered sale deed), and up-to-date GMADA No Dues Certificate (NDC) on Punjab e-Naksha (enaksha.lgpunjab.gov.in).
- Pay Statutory Municipal Scrutiny FeesPay building scrutiny fees, labour cess, and security deposits online through the portal's integrated payment gateway.
- Download Digitally Signed Sanction LetterUnder the self-certification channel, the digitally signed building permit issues automatically upon payment verification and architect certification. Direct GMADA scrutiny files clear within 30 working days.
- Obtain Completion and Occupation Certificate (CC/OC)Upon structural completion, submit notice of completion with photographic proof of setbacks, stilt parking, RWH pit, and solar panels for final OC inspection.
2026 Construction Economics: Cost to Build a 1 Kanal Kothi in Mohali
Building a home on a 500 Gaj plot represents a substantial capital investment. In 2026, construction costs across SAS Nagar Mohali, Aerocity, and New Chandigarh range based on structural specifications and material finishes.
Standard Turnkey Specifications (₹1,800–₹2,400/sq ft)
- High-grade Fe-550 TMT steel and OPC 43/53 cement foundations.
- Vitrified double-charged floor tiling (4x2 ft) and branded sanitaryware (Kohler / Jaquar).
- Modular kitchen with acrylic finish and granite countertops.
- Standard electrical conduit wiring (Polycab / Havells) with modular switchplates.
- Optimized for maximum rental yield across independent floors.
Ultra-Luxury Finishes (₹2,800–₹4,000+/sq ft)
- Italian marble flooring (Statuario / Bottochino) throughout formal living halls.
- VRV/VRF central ducted air-conditioning systems.
- Full home automation (lighting, motorized curtains, biometric security).
- Private hydraulic home elevator serving basement, stilt, and 3 upper floors.
- Substantially higher capital outlay; suited for end-user luxury living.
| Structural Configuration | Total Covered Area (Approx) | Standard Turnkey (₹2,000/sq ft) | Premium Luxury (₹3,200/sq ft) | Estimated Monthly Rental Potential |
|---|---|---|---|---|
| Duplex Villa (G+1 Floor) | 4,800 sq ft | ₹96 Lakh | ₹1.54 Crore | ₹80,000–₹1,20,000 (Full Kothi) |
| Stilt + 3 Independent Floors | 7,800 sq ft | ₹1.56 Crore | ₹2.50 Crore | ₹40,000–₹55,000 per individual floor |
| Basement + Stilt + 3 Floors | 10,200 sq ft | ₹2.04 Crore | ₹3.26 Crore | ₹1,80,000–₹2,50,000 (Entire Complex) |
Hoomzz lists physically verified rentals across Chandigarh, Mohali, Panchkula and Zirakpur, providing transparent rental yield metrics directly from property owners without middleman brokerage fees. For regional context on civic administration and growth corridors, see our comprehensive guide to Sahibzada Ajit Singh Nagar Mohali.
Due Diligence Checklist: Verifying a 500 Gaj Plot Before Paying Token Money
Before handing over earnest money or token advance to a property seller or channel partner, complete four essential statutory checks:
- Verify Ownership on Jamabandi Punjab: Log on to the official Punjab Land Records Society portal (jamabandi.punjab.gov.in). Inspect the latest RoR (Record of Rights) for existing bank mortgages, court injunctions, or undivided co-ownership disputes.
- Check GMADA Allotment & NDC: Request the seller's original GMADA allotment letter, possession letter, and recent No Dues Certificate confirming all water, sewerage, and urban development charges are cleared.
- Physical Demarcation Check: Commission a licensed private surveyor or Halqa Patwari to verify physical boundary pegs. Ensure the actual on-ground dimensions measure exactly 50.00 ft × 90.00 ft without roadside encroachments or corner tapering.
- Examine Zoning Blueprint: Verify that high-tension electric transmission lines or storm-water drainage easements do not bisect your building envelope.
Frequently Asked Questions
Exactly how many square feet is 500 Gaj in Mohali and Chandigarh?
In Chandigarh, Mohali, and Panchkula, 500 Gaj equals exactly 4,500 square feet (500 square yards or 418.06 square metres). This represents a standard urban 1 Kanal residential plot under GMADA and HSVP planning rules. In contrast, traditional rural agricultural revenue records measure 1 Kanal as 605 Gaj (5,445 square feet).
What are the standard front and depth dimensions of a 500 Gaj plot?
The standard dimensions for a 500 Gaj (1 Kanal) residential plot across GMADA sectors (Sectors 68–80, Aerocity, IT City, New Chandigarh) are 50 feet road frontage by 90 feet plot depth. In select private developer layouts, alternative dimensions such as 45x100 feet or 40x112.5 feet are occasionally encountered.
What is the maximum ground coverage and FAR allowed for a 1 Kanal plot under GMADA?
Under the Punjab Urban Planning and Development Building Rules governing GMADA, a 500 Gaj (1 Kanal) residential plot allows a maximum ground coverage of 50% to 60% (2,250 to 2,700 sq ft footprint). The standard permissible Floor Area Ratio (FAR) is 1:2.1, permitting a total cumulative constructed area of up to 9,450 square feet across authorized floors.
Can an owner construct a basement and stilt parking on a 500 Gaj plot in Mohali?
Yes. GMADA building bylaws permit a single-level basement within the zoned building footprint for domestic parking, storage, or building services, provided structural safety certificates are submitted. Additionally, homeowners can build a stilt parking floor with a clear height of 8.5 feet, raising total permissible building height to 15 metres (Stilt + 3 floors).
How does a property owner apply for building plan approval on the Punjab e-Naksha portal?
Building plan applications for plots up to 500 square yards can be submitted online through Punjab e-Naksha (enaksha.lgpunjab.gov.in). Owners engage a Council of Architecture registered architect empanelled with GMADA who prepares CAD drawings matching Smart-DCR specifications, certifies compliance under the expedited self-certification route, and generates digitally signed approval certificates upon scrutiny fee payment.
Where can readers find verified calculators and property guides on Hoomzz?
Readers can access free interactive land unit converters, stamp duty calculators, and rental yield estimators on the Hoomzz calculators route at hoomzz.in/calculators. Hoomzz lists physically verified rentals across Chandigarh, Mohali, Panchkula, and Zirakpur with zero broker fees.
Sources, and what here is judgement rather than data
Statutory Sources & Official Portals:
- Building bylaws, ground coverage limits, FAR parameters, and setback mandates are drawn directly from the Greater Mohali Area Development Authority (GMADA) official portal and the Punjab Urban Planning and Development Building Rules.
- Online building plan submission procedures, self-certification thresholds, and environmental documentation criteria reflect the official workflow on Punjab e-Naksha (enaksha.lgpunjab.gov.in).
- Revenue record definitions (225 sq ft urban Marla vs 272.25 sq ft revenue Marla) and title due diligence protocols are verified against the Department of Revenue Punjab Jamabandi portal (jamabandi.punjab.gov.in).
- Chandigarh UT apartment fragmentation rules reflect the Supreme Court of India January 2023 ruling regarding Phase 1 residential sectors, as documented in regional legal reporting by The Tribune India.
Editorial Judgement & Observed Estimates:
Construction cost estimates (₹1,800–₹4,000 per sq ft) and projected monthly rental yields (₹40,000–₹55,000 per independent floor) represent observed market ranges gathered from active building contractors and verified property listings across Mohali Sectors 68–80, Aerocity, and New Chandigarh in late 2026. Actual construction outlays vary depending on steel market price fluctuations, structural engineering complexities, and interior finish selections.
👈 This comparison is based on market observations and publicly available data. Users should verify details independently.

Prioritize Hoomzz Real Estate News in your Google Search AI Overviews
Google's new search update lets you select trusted sources. Pin hoomzz.in to get our instant local market rates, builder updates, and renting news featured first in your AI answers.
Looking to Buy or Invest?
Access verified luxury kothis, plots & high-ROI commercial properties with clean clear titles in Tricity.